Intruction for the refillable cartridges for Epson 900 1270 1280 1290
Author: Tin Nguyen Views: 13360 Created: 2012-06-17 17:36 Last Updated: 2012-06-30 18:32 100 Rating/ 3 Voters

Intruction for the refillable cartridges for Epson 900 1270 1280 1290


Step 1:Filling the cartridges

 

a. Remove the plugs from the Ink filling hole see picture above

 

b. Slowly insert ink into the ink cartridges though the ink filling hole, about 15ml for black and 10 ml for each color. c. insert the plugs back to the ink filling hole.

Step 2: Install cartridges into the printer

 

Remove your original cartridges install the refillable cartridges. Note the refillable cartridges are not to be used or mixed with original cartridges at the same time.

 

Remove the rubber plugs out of the air hole for air flow.If these plugs are not remove, the cartridges will not work properly


Step 3: Nozzle Check

 

If it shows any breaks (it may be caused by air bubbles in the printing head). Please do nozzles clean for 1 or 2 times. If it is still showing little breaks, especially for only one color please turn the printer off.  It is unnecessary to repeatedly clean the printer-head. Just keep the printer unused (turned off) for about few hours and then print the nozzle check again.





Reset:

If the indicator light is flashing when printing, it suggests that you need to reset the chip to full status. Please turn off your printer for about 30 seconds and switch it back on. Ink meter bar should show full ink status. You can then start printing as usual.

 

Important: Please note that the refillable cartridges are not to be used or mixed with original cartridges at the same time.


http://www.simplyitem.com/esupport



Rss Comments 2
  • #
    [admin]: Where to buy 2012-06-01 06:55

    Check out http://www.simplyitem.com

  • #
    [ Jimmy]: Epson 900 1270 1280 1290 2012-06-01 06:49

    WHere do I buy these refillable cartridges

Info Add Comment
Nickname: Your Email: Subject: Comment:
Enter the code below:
Quick Jump Menu