How to reset the drum ( imaging unit) for Okidata C330dn, C530dn, MC361, MC561, MC890, MC950, MC950 MFP printers
Author: Tin Nguyen Views: 27200 Created: 2013-09-27 18:58 Last Updated: 2013-09-28 00:19 100 Rating/ 1 Voters

How to reset drum( imaging unit) for OKI Okidata C330dn, C530dn, MC361, MC561, MC890, MC950, MC950 MFP printers

The instruction below is for Okidata C330dn printer, but the step will be the same with another OKi printer

1. unplug the power


2. open the printer cover

3 . Prepare a soft cloth to cover the drum from the bottom as well as one on top to protect the drum unit when removing from printer.

4. Remove the drum unit from the printer and place on top of the soft cloth. Use another soft cloth to cover the unit so as to protect it from the light. If the drum unit is exposed to light for too long, the quality of the print will decrease.

5. In this diagram, this is where the fuse will be installed. Please take note of the placement of this area.

6. Return the drum unit back into the printer.  Then close the cover, plug the printer and turn the printer back on. The imaging or drum unit will reset.

7. After the printer resets, it is recommended to remove the fuse out of the unit as it is not needed anymore. When removing the fuse, please follow the same steps as for when installing the fuse.

instruction okidata c330.pdf 0.4 Mb Download File
Rss Comments 2
  • #
    [ Vladimir]: Chip 2017-02-28 23:22

    Hello Tin!
    Can be this chip used repeatedly?
    Thank You for response

  • #
    [ ivan]: question 2016-05-04 18:04

    Hello, can you tell me what type of fuse is , I see it as a thermistor but that name is and I can indicate that technical specifications have '

    Thank you

Info Add Comment
Nickname: Your Email: Subject: Comment:
Enter the code below:
Quick Jump Menu